Automatic nursery seeding machine

Introduction of Automatic nursery seeding machine

The seeding machine is the machine for cultivating seedlings. It refers to the cultivation of seedlings in nurseries, hotbeds or greenhouses for transplanting into the land for planting. It can also refer to this stage in which various organisms are artificially protected until they can survive independently. As the saying goes, "Miao Zhuang is half harvest." Nursery is a labor-intensive, time-consuming, and technical job.

Nursery seeding machine use:

Automatic nursery seeding machine consists of paving assembly, sprinkler assembly, seeding assembly, covering soil assembly and transmission system, frame and power unit. It is suitable for planting seedlings of flowers, vegetables, tobacco, melons, herbs, grasses, etc.

Nursery seeding machine product features:

The main body is made of aluminum alloy body and accessories, stainless steel screws

PLC programmable control, touch screen operation, data can be adjusted.

Automatic mixing, feeding, loading, positioning, drilling, sowing, covering, sprinkling, closing

German vacuum pneumatic system, pressure suction adjustable

Robotic control accuracy

With independent limit fault alarm system, LED lighting tube fault display

TZY-C Chaff Cutter machine

Taizy machine's TZY-C Chaff Cutter machine is made of thick steel plate and 65 manganese steel knife, which replaces the metal/steel knife used by other manufacturers, which is more durable and sharper than it! The machine is equipped with long, empty and short three-speed, adjustable weed length. This Chaff Cutter machine can not only cut the forage, but also crush the grain.

The Chaff Cutter machine is used for chopping all kinds of forages such as green, hay, cereal, straw, wild grass, wheat straw, corn stover, etc. It is a widely used economical weeding equipment, which is small in size and light in weight. Installation, operation, easy maintenance, high production efficiency and so on. Production for feeding cattle, horses, sheep, pigs and other livestock forage and manure, straw returning. Main use: Feed the grass into a small section of 1 to 2 cm to feed cattle, sheep, geese, fish or make green storage. Can process a variety of forage and straw, wet and dry.

The Chaff Cutter machine is mainly composed of a body, a grass roller, a knife holder assembly, a blade, a feeding device, and a frame.

This weeding and smashing machine mainly has a frame part, a roller part, a grass feeding part and an overload protection device, and has a simple structure.

Main performance characteristics:

First, the mechanism is compact, small in size, light in weight and convenient to move.

Second, the two rollers can automatically "eat", reduce the labor intensity when discharging, and improve efficiency.

Three or four blades are made of 65 manganese steel knives. The blade is sharp, and the grass that is pulled out is not only flush, but the breaking rate is high, and the quality of sorghum is good.

Fourth, the machine is equipped with an overload protection device, which can avoid the malfunction of the card machine that occurs when there is too much discharging.

Five, the body is fully mining steel material, durable

Mower range:

Cut green, dry corn stalks, wheat straw, straw, alfalfa and various crop straws and pastures.

corn sheller

Introduction to corn sheller:

Corn thresher is a mechanical device for threshing corn ears. Corn thresher has the characteristics of high automation, strong safety, easy operation and low energy consumption.

The function of the corn thresher is to thresh the dried corn ears. Mostly axial flow drum type, also has vertical threshing disc type. Because of its high production efficiency, good threshing quality, simple operation, simple structure, sturdy and durable, reliable work and convenient maintenance, it has been popular among farmers for many years.

The corn thresher is mainly composed of a drum, a concave plate, a sieve, a fan, a feeding hopper, a seed skateboard, a spiral guide rod and the like. It uses an axial flow threshing device that feeds the shaft end of the shaft tangentially. The process flow: the corn ear enters the drum through the feeding hopper, and is threshed under the interaction of the high-speed rotary drum and the interaction of the corn ear, the drum and the concave plate. Most of the removed kernels and fine hybrids pass through the concave plate holes, and are cleaned by a fan. Light miscellaneous materials are blown out from the discharge port, and the grain is slipped out of the machine by the grain slide. The cob moves backwards along the axial direction of the drum, and the outlet of the shaft end is discharged outside the machine through the surface of the vibrating screen. Some of the seeds entrained in the cob are leaked through the sieve hole and enter the grain slide to slide out of the machine.

Corn sheller usage precautions

The following should be noted during the use of the corn thresher:

1) Because the working environment of the thresher is very bad, it is necessary to conduct safety operation education for the personnel participating in the operation, so that they can understand the operating procedures and safety common sense, such as the sleeves should be tight, masks and protective glasses should be worn.

2) Before use, it is necessary to carefully check whether the rotating part is flexible and non-collision, whether the adjusting mechanism is normal, and whether the safety facilities are complete and effective; to ensure that there is no debris in the machine, the lubricating parts should be filled with lubricating oil.

3) The working site should be cleaned before starting, and some debris not related to threshing should not be placed; children should be prohibited from playing on the side of the site to avoid accidents.

4) When working, the corn cob should be evenly fed, and the stones, sticks and other hard objects should be prevented from feeding into the machine.

5) The joint of the drive belt should be firm. It is strictly forbidden to pick up the belt when the machine is running or touch any object to the transmission part.

6) The transmission ratio between the supporting power and the thresher should meet the requirements, so as to avoid the personal injury caused by the high speed of the thresher and the vibration, causing damage to the parts or loose fasteners.

7) It is not possible to work continuously for too long. Generally, it should be stopped for inspection, adjustment and lubrication for about 8 hours to prevent friction, heat, or deformation.

8) When the thresher is powered by a diesel engine, a fire hood should be worn on the exhaust pipe to prevent fire.

9) If the threshing machine fails during the operation, it should be stopped and repaired and adjusted.